Leaching Chemical YX500 to Replace Sodium Cyanide Powder
Product Introduction
This product is a new type of leaching reagent independently
developed by our company. It is a series of high-tech products that
can completely replace cyanide and achieve efficient leaching of
gold. The gold leaching agent is suitable for a variety of
gold-containing ore and materials and related leaching processes,
mainly including: gold, silver oxide ore, primary ore, cyanide
tailings, gold concentrate, roasting slag, anode mud, etc.
Leaching, pool leaching, charcoal pulp, stirring leaching and other
leaching processes.
Advantage
1. Lower Cost: Because of its special nature, it can reduce the
cost of purchasing, shipping, warehousing, usage and
environmentally friendly equipment.
2. Easy to Use: Because it can be completely substituted for sodium
cyanide in the cyanidation process, it is convenient to use and can
replace at any time.
3. Easy to Transport: Due to its stable nature, it can be
transported by rail, sea, road and air. There are no transportation
restrictions like sodium cyanide.
4.. High-Tech Products: It is a high-tech product that can replace
sodium cyanide for gold leaching.
Our Advantages
1. Background: more than 40 years mining industry experiences;
2. Product: patented products, specially for complex difficult mineral ores
3. Technology service: adjust formula and recommend most suitable product model according
to different application environment
4. Technical engineer on-site service: arrive at site within 24 hours
5. Samples provided
Operating Instruction
Usage: It is used in the same way as sodium cyanide in heap
leaching, pool leaching and agitation leaching of gold ore.
Alkalinity Adjustment: Generally, the pH of the slurry is adjusted
to 10-12 using alkaline substances such as lime and caustic soda.
After the raw ore is piled up or put into the pool, the alkalinity
should be adjusted to the pH of 11±1.
Dosage: The dosage of CNLITE gold dressing agent can refer to the
dosage of sodium cyanide. Its dosage is about 0.5 to 1.0 parts per
thousand (500-1000g of reagent/ton of ore).
Add Method: It can only be used after it is fully dissolved in
normal temperature water. The rate of dissolution is usually
accelerated in running water or after thorough agitation.
Reagent Concentration: Because the pH and composition of different
ores are different, the CNLITE gold leaching reagent should be
dispensed according to the actual ore amount and the optimal
concentration of the reagent obtained from the trail.
Company profile
Y&X Beijing Technology Co., Ltd,is a professional metal mine
beneficiation solution provider, with world-leading solutions for
refractory beneficiation. Over the years, we have accumulated rich
successful experience in the fields of copper, molybdenum, gold,
silver, lead, zinc, nickel, magnesium, scheelite and other metal
mines, rare metal mines such as cobalt, palladium, bismuth and
other non-metal mines such as fluorite and phosphorus. And can
provide customized beneficiation solutions according to the
customer's ore properties and production conditions, including the
most advanced beneficiation methods, the most efficient
beneficiation reagents, to ensure maximum benefits for customers.
Over the years since its establishment, the company has focused on
the R&D, production and application of efficient and
Eco-friendly beneficiation reagents, provide effective support for
the construction of green mines; improve the efficiency of
beneficiation reagents, thus improving the effective utilization of
resources; Some of our new flotation reagents have enabled some
mines which cannot normally produce products to achieve
industrialized production, turning waste into treasure!
Our company's products mainly include:
High-efficiency frother, its using effect is better than common
frother such as terpineol oil, MIBC, etc;
High-efficiency collector, which can improve the metal recovery
rate to a greater extent than traditional collectors;
The pioneering depressant is a powerful tool for solving complex
refractory beneficiation of high talc, high carbon and high fine
mud/ clay. The special copper depressant provides a better solution
for beneficiation operations such as copper and molybdenum
separation;
High-efficiency activators and regulators are also the cornerstone
of our company to improve the beneficiation index;
Comparing with the world's top brands, our flocculent has better
cost performance and richer experience in mining applications.
Y&X Company is willing to provide you with the better one-stop
beneficiation solution. Hand in hand for a win-win situation, we
sincerely look forward to cooperating with you!
FAQ
Q1.Where is your factory located?
Our factory is in shandong, China. Located in an independent
chemical park.
Q2.Can you give me a better price?
We value the cooperation with each customer and will provide you
with the most favorable price.
Q3. How can you guarantee your quality?
Our production adopts fully automated production control to ensure
the continuity of production and the stability of quality.
We have a strict production quality management system. Strict
quality control is implemented on the raw materials, semi-finished
products, finished products and products leaving the factory.
Quality first has always been the basic principle of our company.
We also support customers to obtain samples for testing.
Q4.When is the delivery time?
Our production capacity: Xanthate: 50,000t/a; Dithiophosphate:
20,000t/a; Frother: 10,000t/a
For conventional products, we will keep inventory to ensure timely
delivery within the time required by customers.
Q5:Which type of shipping would be better?
In consideration of the requirements of the customers in different
rigions, we make deliveries by sea, air, train, truck, etc.
Q6: Can i get a sample?
Yes, you are welcome to get samples for testing.
