Flocculant Polyacrylamide for Tailing Treatment Wastewater
Treatment Coal Mine etc
Product introduction
PAM is granule or white powder.It has a variety of active group,
with many substances affinity adsorption, forming hydrogen bond.
Mainly flocculation negatively charged colloid in turbid,
bleaching, adsorption, adhesive and so on the function, apply to
imine tailing treatment, coal mine washing, wastewater treatment in
dyeing, papermaking, foodstuff, building, metallurgy, coal, oil and
mineral, aquatic products processing and fermentation etc.
High-molecular-weight polyacrylamide (PAM) has been widely used in
chemically enhanced oil recovery processes under mild conditions.
The conversion of some of the amide groups on the polyacrylamide to
carboxylate groups provides greater viscosity, even when low
concentrations of polymer are added to the injected water.
| Item | Specification |
| Product Name | Polyacrylamide / Flocculant |
| Appearance | White crystal granular |
| CAS No. | 9003/5/8 |
| Molecular Weight (million)) | 5-15 |
| Dgree Of Hydrolysis | ≤6% |
| Purity | ≥90% |
| Remainder Monocase | ≤0.05% |
| Efficiency PH Scope | ≤1-8 |
| Packing | 25kg / bag, 1 ton / pallet |
| Odour | Odorless |
| Causticity | Non-corrosive |
| Thermal stability | Easy to Decompose when Temperature above 120° |
PAM Instruction for Use
1. Dissolution: Dissolve polyacrylamide in water to make a 0.5-5‰
solution. Do add polyacrylamide into water in a gradual and
continuous way.
2. Blending: Don’t blend the solution to hard or too fast.
Suggested rotational speed of blender: 60-200 rpm.
3. Container: Do dissolve polyacrylamide in containers made of
enamel, aluminum or plastic. Do not use iron containers to dissolve
or keep polyacrylamide, the effect of the solution will be affected
due to degradation otherwise.
4. Time to Dissolve: Dissolve polyacrylamide when there is need to
use. Do not use solution that was made long time ago.
5. Do not blend the turbid liquid too hard or for too long after
polyacrylamide solution was added.
6. Concentration of cationic and nonionic polyacrylamide solution
should be lower than that of anionic polyacrylamide, as the formula
weight of the former two is less than the latter, thus weaker
viscosity.
Company profile
Y&X Beijing Technology Co., Ltd,is a professional metal mine
beneficiation solution provider, with world-leading solutions for
refractory beneficiation. Over the years, we have accumulated rich
successful experience in the fields of copper, molybdenum, gold,
silver, lead, zinc, nickel, magnesium, scheelite and other metal
mines, rare metal mines such as cobalt, palladium, bismuth and
other non-metal mines such as fluorite and phosphorus. And can
provide customized beneficiation solutions according to the
customer's ore properties and production conditions, including the
most advanced beneficiation methods, the most efficient
beneficiation reagents, to ensure maximum benefits for customers.
Over the years since its establishment, the company has focused on
the R&D, production and application of efficient and
Eco-friendly beneficiation reagents, provide effective support for
the construction of green mines; improve the efficiency of
beneficiation reagents, thus improving the effective utilization of
resources; Some of our new flotation reagents have enabled some
mines which cannot normally produce products to achieve
industrialized production, turning waste into treasure!
Y&X people's mission is to make all mines in the world to be
selected! This is the driving force and source of Y&X people's
struggle! Y&X people always keep our mission in mind and strive
hard to overcome difficulties and move forward on this mission!
Our company's products mainly include:
High-efficiency frother, its using effect is better than common
frother such as terpineol oil, MIBC, etc;
High-efficiency collector, which can improve the metal recovery
rate to a greater extent than traditional collectors;
The pioneering depressant is a powerful tool for solving complex
refractory beneficiation of high talc, high carbon and high fine
mud/ clay. The special copper depressant provides a better solution
for beneficiation operations such as copper and molybdenum
separation;
High-efficiency activators and regulators are also the cornerstone
of our company to improve the beneficiation index;
Compared with the world's top brands, our flocculant has better
cost performance and richer experience in mining applications.
Y&X Company is willing to provide you with the best one-stop
beneficiation solution. Hand in hand for a win-win situation, we
sincerely look forward to cooperating with you!
FAQ
Q1.Where is your factory located?
Our factory is in Shandong, China. Located in an independent
chemical park.
Q2.Can you give me a better price?
We value the cooperation with each customer and will provide you
with the most favorable price.
Q3. How can you guarantee your quality?
Our production adopts fully automated production control to ensure
the continuity of production and the stability of quality.
We have a strict production quality management system. Strict
quality control is implemented on the raw materials, semi-finished
products, finished products and products leaving the factory.
Quality first has always been the basic principle of our company.
We also support customers to obtain samples for testing.
Q4.When is the delivery time?
Our production capacity: Xanthate: 50,000t/a; Dithiophosphate:
20,000t/a; Frother: 10,000t/a
For conventional products, we will keep inventory to ensure timely
delivery within the time required by customers.
Q5:Which type of shipping would be better?
In consideration of the requirements of the customers in different
regions, we make deliveries by sea, air, train, truck, etc.
Q6: Can I get a sample?
Yes, you are welcome to get samples for testing.
