Effective Molybdenum Collector M1001S for Ore Flotation Process
Product description:
Product name: Collector M1001S
Appearance: Yellow oily liquid;
Dosage: This product is insoluble in water, and can be added to the
original solution or mixed with emulsifiers for use. The addition
point is usually in the ball milling or flotation stage, and the
specific addition position should refer to the site. The usual
dosage of reagents is 2-100 g/t of raw ore. This collector has no
foaming properties and requires the addition of more frother than
xanthate and other collectors for use.
Use/Application: Successfully used for flotation of copper ore
containing molybdenite, a highly selective copper molybdenum
sulfide mineral collector can improve the recovery rate of
molybdenite and improve subsequent copper molybdenum separation. It
can also be used for the flotation of low alkalinity primary copper
and copper sulfide, and is the main collector for the recovery of
copper from copper slag in smelters. This product is one of the
most selective copper collectors, with extremely weak collection
ability for pyrite. It can achieve copper sulfur separation under
low alkalinity conditions and is an excellent collector for high
sulfur copper ore flotation. This product does not have foaming
properties and needs to be combined with frother or emulsifiers
during use.
Packing:
200kg/drum, 1000kg/IBC drum
Storage:
1. Store in a shaded, well ventilated place;
2. Keep away from strong oxidizing agents, strong
reducing reagents, or open flames;
Composition:
Active Component:
S-allyl O-pen-tyl dithiocarbonate
2-Ethylhexyl mercaptoacetate
Safety and handling:
Avoid formation of dust and aerosols. Avoid contact with skin and
eyes. Operating personnel must train specially and follow close to
the line of operating instruction. Avoid accumulate dust.
Wear suitable protective clothing, gloves and eye / face
protection.
Environmental impact:
The majority of the reagent is tied up with the concentrate and is
destroyed in the subsequent processing operations.
The remainder is transferred to the tailings . Release into the
water systems should be avoided.
Precautions:
1. Avoid violent impacts during transportation;
2. The Shelf life is 36 months.
